Clock polarity and phase In addition to setting the clock frequency, the master must also configure the clock polarity and phase with respect to the data. Motorola SPI Block Guide names these two options as CPOL and CPHA respectively, and most vendors have adopted that convention.
sudo apt-get install -y dnsmasq sudo service dnsmasq restart sudo apt-get install dnsutils or yum install bind-utils(for nslookup and dig tool) example: address=/EITE.ORG/22.214.171.124 Save as test.conf under /etc/dnsmasq.d/, sudo service dnsmasq restart after that EITE.ORG is point to 126.96.36.199 now.
manage-bde.exe d: -lock BitLocker Drive Encryption: Configuration Tool version 10.0.14393 Copyright (C) 2013 Microsoft Corporation. All rights reserved. Volume D: is now locked
Enable: Type command in command line: bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS bcdedit.exe /set nointegritychecks off. Disable: bcdedit.exe /set nointegritychecks on. Change the Startup settings
Issue: KB3201845 cause win10’s disk written in 100% usage. C:\Windows\Temp\WPR_Initiated_DiagTrackAotLogger_WPR System Collector.etl Temporary solution: 1, WIN+R —> cmd wpr -cancel 2, Stop service:Connected User Experiences and Telemetry
Case: Lost tcl of compiling ecos2.1
Issue: bash: xx command not found Solution: sudo apt-get install ia32-libs sudo apt-get install lib32ncurses5 lib32z1 apt-get install lib32stdc++6 Reason: 64bit system can’t run 32bit program very well…